Low profile socket or foot adapter with the use of any m36 three prong.

Applications:

1. Will save the build height of any pyramid knee or foot over the use of a standard m36 female adapter.

2. Convert any pyramid knee into a knee disarticulation application.

3. Convert any low profile pyramid foot into a Symes application.

Instructions for PTF-LP (titanium) and PSF-LP (Stainless Steel):

Four m8 set screws to be torqued to 13nm and loctited with Loctite® 242.

The four m8 set screws must be set and torqued below the root diameter of the external m36 thread. Ensure the set screws when torqued and loctited clear the m36 thread prior to assembly. When clamping the m36 thread and fully tightened, the m36 thread should not at any point contact the four m8 set screws as this will damaged the m36 three prong adapter.

The four m8 set screws must be engaged a minimum of 6mm in each of the four m8 threaded channels of the PTF-LP and PSF-LP for safe performance (use longer m8 set screws when maxing out alignment).