Heavy Duty Attachment Plate, Top Loaded, Stainless Steel

Use to attach 65mm top load lock to HD pyramid.

The plate has the 6 holes of regular HD-AP plus an additional 4 threaded holes in the 65mm hole pattern for a top loaded lock to attach to.

FOR USE WITH A BULLDOG TOP LOADED LOCK

500 lb. weight limit

BULLDOG® Heavy Duty Adapter Plates

Part Numbers:  HD-AP and HD-AP-TL, HDT-AP and HDT-AP-TL

Loctite 242 should be used on all items threaded into these plates. Refer to instructions on thread locker for how to use.

The HD-AP and HD-APTL plates are not the same thickness.

These plates were designed to go inside of the socket with the rounded edge facing distally making contact with the socket evenly and flat across the entire plate. The angled edge will be facing up.

There are (6)  M8 x 1.25 threaded holes to secure the BULLDOG HD pyramid to the socket and plate. You must also ensure the (6) M8 screws do not extend through the plate and hit anything on the other side when torqued and seated, but must be engaged at least .300 of an inch.

On the HD-APTL there are additional (4) M6 x 1.25 threaded holes for attaching a BULLDOG® top loading lock refer to lock for torque setting of these four screws. If no other attachments will be interfacing with the lock and HD-APTL. It’s recommended to order the top loading lock with (4) m6 x12 socket head cap screws in it to fit with the HD-AP-TL.

You must ensure the (4) m6 socket head cap screws in the lock do not extend through the plate when torqued and seated, but they must also engage the plate at least .250 of an inch.