|
*** All in Newton Metric ***
All Torque Setting should be done with properly calibrated torque wrench.
| Genesis Locks |
10 |
| OSAP (all sizes) |
10-12 (Pyramid to OSAP
10 (OSAP to Lock) |
| TCA-1S |
13-14 (4 Receiver screws)
7-8 (Side screw on clamp) |
| TCA-2S |
13-14 (4 Receiver screws)
6-7 (Side screws on clamp)
Alternate screws until both are 6-7 |
| TCAM-2S |
13-14 (Pyramid end)
7-8 Alternate until both are at 7-8 (Side screws on clamp |
| FHAP (I or M) |
9-11 |
| PR |
12 |
| UNIV-B |
5.8-6.2 (M5x10 Socket Head Caps Screws) side rail
9-11 (M6 Screws) |
| UNIV-PR |
5.8-6.2 (M5x10 Socket Head Caps Screws) side rail
12 (Receiver screws) |
| UNIV-TC |
5.8-6.2 (M5x10 Socket Head Caps Screws) side rail
8-8.5 (Side screws on clamp) |
| SACH |
10-12 |
| DER (32, 45, 60 & 75) |
13-14 |
| P16 |
10 |
| HD-AP-TL |
30 (Pyramid to Attachment plate)
10 (Top Load Lock to Attachment Plate) |
| HD-TCA-2S |
35 (4 Receiver screws)
20 (Side screws on clamp)
Alternate screws until both are 20 |
* Loctite 242 should be used on every screw & torqued to the appropriate settings.
|
